|
|
True Flow Foam Air Filters
 True
Flow foam filters, designed to give you the best combination of
filtration and airflow, represent the latest advance in air filtration
technology for automobiles.
True Flow foam filters are made up to two part polyurethane foam.
The composition of our foam filters is a series of tiny interlocking
cells of uniform size without straight through passageways, that
create an impossible journey for dirt particles. Each passageway
is like hundreds of very small oil bath filters or cells connected
one to another. The cell strands stop the dirt, while the oil
film holds the dirt like fly paper until removed when the filter
is
cleaned. This is why foam filters are referred to as "full
depth" filters. Foam filters are over 12 times thicker than
paper or gauze elements, which are screens, or "surface type" filters.
|
|
Because foam is a full depth filter even as dirt is being stopped,
airflow can continue at a high rate by simply going around the trapped
dirt. Unlike paper and gauze filters, foam filters will continue to
perform well as the filter gets dirty. With its lifetime warranty True
Flow foam filters are washable and reusable to give any automobile
a lifetime of great filtration and performance.
|
|
 Foam:
1. Foam is a two part polyurethane (soft durable plastic) material.
2. While it looks very thick, it is actually more than 90% air.
 3. The interlocking cells trap dirt through the entire volume of
the filter.
4. Foam oil is actually a combination of oil, a flame retardant,
and a non- drying glue that under normal conditions will last up
to 50,000 miles.
5. When properly washed foam will look and be as clean as new.
 6. True Flow foam filters will not void factory warranty.
|
|
True Flow foam filters are easy to wash and re-use. Follow the
simple cleaning instruction included in your filter box at the
cleaning intervals and enjoy great filtration and airflow for the
life of your vehicle.
We recommend the use of True Flow’s Cleaning Kit (Part No.
95110)
Foam filter cleaner is necessary for proper cleaning!
True Flow Foam Filter Cleaner:
Spray generous amounts of True Flow Cleaner on the inside and outside
of the filter. Let it soak approximately 3-4 minutes. Rinse out the
filter element in warm water until clean. A second application may
be necessary for heavily soiled elements. Finally, make sure filter
is completely dry before re-oiling.
Clean filter frame, clean filter mounting surface and air box.
Now you're ready to oil.
|
|
More Information:
About True Flow
True Flow Air Intakes
Vehicle
Application Guide
~ Buy Now ~ |
|
|
|
